新闻中心

新闻中心

img

NEWS

How to operate the universal remote control

2022-08-29 17:12

1. Install the battery.

Use the universal remote control normally. Need to install the battery, pay attention to use a new battery, do not mix old and new batteries, it is easy to damage the remote control and shorten the use time.

2. How to turn on the TV.

Press and hold the red button on the universal remote to turn on the sleeping TV. But some universal remotes need to turn on the TV to control, then turn on the TV through the switch on the TV.

3, the method of changing the station.

Before using the universal remote control to change the channel, the remote control must be activated first. Generally, the universal remote control has buttons for various major brands of TVs, such as the 1 button for Changhong TV, the 2 button for LG TV and so on. According to your TV brand, press and hold the corresponding number button for a long time until the red indicator light of the remote control flashes, indicating that the universal remote control has been activated and can be used normally.

4. If there is no corresponding button indication for a brand-name TV, you can press and hold the general button, and also wait for the indicator light to flash before releasing your hand.

5. If the remote control fails during the process of using the universal remote control, press and hold the volume button of the remote control, and the red indicator light of the remote control will flash back to normal.

Use caution

1. The universal remote control cannot add functions to the air conditioner. There is no wind direction function on the air conditioner, and the wind direction key of the universal remote control will also be invalid.

2. The remote control is a low-consumption product. Under normal circumstances, the battery life is 12 months. Improper use will shorten the battery life. Replace two batteries at the same time. Do not mix old and new batteries or batteries of different types.

3. To ensure that the air conditioner receiver is normal, the remote control is valid.

4. If the battery leaks, the battery compartment must be cleaned and replaced with a new battery. To prevent leakage, remove the battery when not in use for a long time.

When using the remote control, the distance between the remote control and the remote control receiver should not exceed 10 meters. When using the remote control, the remote control should be aimed at the receiving direction of the electrical appliance, and the left-right deviation angle should not exceed 25 degrees. There should be no obstacles between the remote control and the receiver, such as people, objects, etc., so as not to block the normal transmission of infrared rays and cause the remote control to fail. When using the remote control, avoid strong light, including sunlight and lighting, otherwise it will affect the use of the remote control.

The remote control can temporarily turn off the controlled electrical appliance, but some internal circuits are still working, and the electrical appliance cannot be turned off completely. Therefore, when the electrical appliance is not in use, turn off the electrical power supply or pull out the power plug in time. If the electrical appliance cannot be turned off with the remote control, it is finished. .

When the remote control is not used for a long time, the battery in the box should be taken out to prevent the electrolyte in the battery from leaking and corroding the components in the box. The transmitter window of the remote control and the receiver window of the electrical appliance should be kept clean so as not to affect the normal use.