新闻中心

新闻中心

img

NEWS

Three methods of universal remote control settings

2022-08-29 17:10

Method 1. Fast digital input method

Step 1: Find the three-digit code from the code table that represents the TV you want to remote control.

Step 2: First press and hold the SET button, then press the POWER button, and then release the two buttons, and the work indicator lights up.

Step 3: Enter the three-digit code you found, such as 083, enter a number, the indicator light flashes, after the three-digit number is input, the work instruction light goes out, and the setting is completed, you can use the remote control to remote control your TV.

Note: If there are more than one set of codes found, select the first set of codes first, if the TV brand is not in this code table, try the first or third method. If it flashes twice or more continuously, it means that the entered code is wrong, and you need to re-enter the three-digit code.

Method 2: Automatic Digital Search

Step 1: Manually turn on the power switch of the TV you want to remote control, so that the TV is in a program state.

Step 2: Aim the remote control towards the TV, first press and hold the SET button, then press the POWER button, and then release the two buttons, the work indicator lights up.

Step 3: Press the volume (or – ) button on the remote control once, and pay attention to whether the volume on the TV is increasing (or decreasing), and repeat this operation until the volume on the TV is increasing (or decreasing). ), stop the operation, and then press the setting button, the working indicator light will be off at this time, and the setting is completed.

Note: The [Volume +] key is to search forward, and the [Volume] key is to search backward, which can be switched between each other during the search. 】Retrieved in time.

Method 3. One-click quick search

Step 1: Turn on the TV.

Step 2: Aim the remote control at the TV, press and hold the [SETTING] button (about a few seconds) until the indicator lights up and release.

Step 3: Press the [Power] button once, the indicator light will flash continuously, and enter the automatic search. When the [Mute] symbol appears on the TV, immediately press the [Setting] button twice, the indicator light will be off, and the search code is completed.

Note: Check whether the function of each key is normal. If it is not normal, reset it until the most correct code is found.